OPENROAD 9500lb Winch Luxury Heat Series1 With Synthetic Rope
The Heat Luxury series 1 winch the maximum pulling force can reach 9500lb,Uses a special silicon steel designed inner rotor, which in turn gives you more power while consuming less current. The surface of the winch is polished to reduce water droplets on the surface of the winch, and it is IP67 waterproof and easily resistant to dust, water and mud.This winch can be applied to jeep, large off-road vehicles, small trucks, etc., at the same time equipped with wired and wireless remote control, you can use the winch more diversified , Also supports a lifetime mechanical warranty, a 3-year electrical warranty, free shipping, allowing you to enjoy more discounts.
IP67 Waterproof rating
Luxury OPENROAD Heat Series1 Standard Work Winch Finished with a polished finish to reduce the retention of water droplets and dust. MAXIMUM CORROSION RESISTANCE - Over 300 hours salt water tested, extremely waterproof, and meets stringent IP67 standards. Suitable for various harsh environments.
Latest gearing system
We concentrate on the gearing. The Heat Series1 Winch opted for forged steel instead of stamped steel,which means to pull more load at faster speed. And without detriment sacrificing durability.
Heat Luxury Series 1 is equipped with a new high-speed motor, the inner rotor is designed with special silicon steel, and the transmission ratio is stronger. The 100% pure copper motor provides a more efficient speed ratio, which in turn gives you more power while consuming less current.
OPENROAD takes customer feedback and personally makes vehicle decals for wheelers and offroad fans. To convey our faith: To Be The Adventurer.
Specification & Package
|Single Line Rated Pull||9500lbs(4310kgs)|
|Extra Wireless Remote Switch||optional|
|Gear Train||3 Stage Planetary|
|Gear Reduction Ratio||216:1|
|Braking||automatic Load-holding Brake|
|Drum Size||diameter 2.5”(63.5mm)xlength9.6”(224mm)|
|Remote Control Switch||included|
|Overall Dimension(length x width x height)||20.8”x6.3”x8.6”(530x160x218mm)|
|Mounting Bolt Pattern||10”x4.5”(254x114.3mm)|
|9500LBS winch x1|
|Wired remote control x1|
|Wireless remote control x2|
|Motor lead x3|
|Aluminum cable fairlead x1|
|Double hook x1|
|Power cord x1|
|Bolt set x1|
|Control box x1|
|User Manual x1|
Please read the instructions carefully and wire according to the instructions. Winches are electrical products that can cause short circuits and heat or smoke if wiring is wrong.
We suggest that you find a professional to install. If there are any problems on the installation, please feel free to consult at any time.
If you have any questions, please contact us and we will arrange to solve them for you.
Winch Overload Protector
Connection method: One side is connected to the red power cord of the control box and the other side is connected to the positive pole of the power supply.
The overload protector is just like its name, its function is to cut off the power directly when it detects that you have been overloaded, so as to avoid accidents.
After it is powered off, there is no need to worry that the winch will be released directly, because the winch itself has an automatic braking function.
The two functions work at the same time. and the winch can be safely stopped when the winch is overloaded.